Log in
My Cart
Impact Air Vapor Helmet SNELL SA2020
Impact Air Vapor Helmet SNELL SA2020
Impact Air Vapor Helmet SNELL SA2020
Impact Air Vapor Helmet SNELL SA2020
Regular price
Price
$999.95
Regular price
Price
Sale price
$999.95
In stock
Description
PLEASE NOTE THAT HELMETS ARE CUSTOM-BUILT AND TAKE 4-6 WEEKS.
Impact’s Air Vapor helmet is another exclusive safety solution that has tried and true features for every racer in every form of motorsports. Impact’s unique “Ripple Effect” aerodynamic modeling controls airflow around the helmet for stability while the extended chin foil captures downward airflow to reduce helmet lift and buffeting. A high-bypass air induction system circulates air around the head and face as stale air is channeled towards the dual rear exhaust vents. Featuring a slightly narrowed eye port with excellent peripheral field of vision, the Air Vapor helmet is the ideal choice for racers concerned with track debris entering the cockpit. Proudly manufactured in the heart of Gasoline Alley, the Impact Air Vapor is the result of driver feedback, making this a helmet for racers, by racers. Like all of Impact’s helmets, the Air Vapor includes our fire-retardant, variable-density, single-piece Gray Matter helmet liner, a three-position detent 1/8” polycarbonate shield, a fire-retardant Kevlar® chin strap with dual D-Ring closure, and includes removable cheek pads. Optionally available cheek pads are available in a variety of thicknesses and configurations to provide a custom fit.
*Add custom options like a helmet skirt, FHR Posts, or a communication radio system to your helmet before it leaves our facility here on this page using the drop-down menus provided.
• SNELL SA2020 CERTIFIED
• Shell construction featuring proprietary American space-age
• Carbon-Kevlar® tri-weave composite.
• Top air inlet to keep your helmet free and clear
• "Ripple Effect" boundary layer created by shell shape, stabilizes helmet/head in high speed airflow.
• Gray Matter fire-retardant covered liner made of Impact's "intelligent" single piece variable-density core.
• Interchangeable cheekpads for a perfect fit (comes with std cheekpads, other sizes are extra).
• Fire-retardant Kevlar® chinstrap with locking dual D-ring design.
• .125" Clear Shield comes standard with 3 position detent.
*Add custom options like a helmet skirt, FHR Posts, or a communication radio system to your helmet before it leaves our facility here on this page using the drop-down menus provided.
• SNELL SA2020 CERTIFIED
• Shell construction featuring proprietary American space-age
• Carbon-Kevlar® tri-weave composite.
• Top air inlet to keep your helmet free and clear
• "Ripple Effect" boundary layer created by shell shape, stabilizes helmet/head in high speed airflow.
• Gray Matter fire-retardant covered liner made of Impact's "intelligent" single piece variable-density core.
• Interchangeable cheekpads for a perfect fit (comes with std cheekpads, other sizes are extra).
• Fire-retardant Kevlar® chinstrap with locking dual D-ring design.
• .125" Clear Shield comes standard with 3 position detent.
Care & Cleaning
-
Please carefully read, understand and adhere to the following information. Since your helmet is engineered to very exacting standards, correct care is vital to its proper functioning.
SHIELD HARDWARE: to insure proper shield fit and function, it is important to check the tightness of the shield pivot and shield positioning screws before every use. Tighten until screws are firmly seated, careful to not over tighten.
HELMET CHEEK FIT PADS: to change, remove or replace cheek fit pads, turn the helmet upside down and place thumb under cheek pad and ‘pinch’ thumb with fingers on exterior shell. This will prevent separating and helmet upholstery from the shell as you remove the cheek fit pad. With free hand, slowly pull the cheek fit pad away from the hook and loop interior starting at the corner. Replace with new cheek pad.
HELMET INNER LINER: after a race, wet fit pads and liner should be dried in the shade using a fan.
MINI CHAMP & VAPOR HELMET INSERTS: The helmet comes from the factory as a size large without an insert. To place insert into the helmet perform the following: Hold Helmet with base opening facing you. Carefully fold back hat band upholstery toward you around the entire circumference of the helmet. Insert a Quick-Fit insert at the rear of helmet first and continue to push insert in and smooth insert down around the entire crown of the helmet. Fold hat band liner back into position.
HELMET HARDWARE: all fastening hardware and straps should be checked regularly for strength and security. Keeping all components of the helmet clean and well cared for is very important. Even perspiration can compromise the effectiveness of the hardware and straps.
wRITE REVIEW
